Home > Products > YLW Series Biomass-fired Thermal Fluid Heater

YLW Series Biomass-fired Thermal Fluid Heater

Capacity:1.4-8.2 MW

Thermal efficiency:80%

Fuel:Biomass fuel

Working pressure:0.8/1.0 MPa

Output temperature:320 ℃

Applications:chemical industry，plastics industry，textile industry，rubber industry

Enquiry Send Email

Introduction Parameters

Introduction of YLW Series Biomass-fired Thermal Fluid Heater
YLW thermal fluid heater is square coil horizontal chain grate shop-assembled heater, chain grate and heater proper are transferred separately. It adapts chain grate to realize mechanical feeding coal, mechanical venting by blower and induced draft fan, and mechanical discharging by slag machine.

Fuel falls on the grate from coal bucket during operating and burning, high temperature smoke enters furnace by passing combustion arch, after radiation heat exchange, smoke enters convection heating surface for convection heat exchange, then goes to waste heat boiler and air heater, at last enters dust collector then is vented into the atmosphere through chimney by induced draft fan.

Technical advantages of YLW Series Biomass-fired Thermal Fluid Heater

Digitized manufacture

The laying-off of steel tube adopts CNC 3D laser cutting machine.
The manufacture of square coil tube adopts CNC three-dimensional tube bending machine, no forced shaping.
The manufacture of serpentuator adopts serpentuator automatic production line, once-forming.

Full argon arc welding

Square coil tube and coil tube all adopt argon arc welding technique,which guarantees tubes are 100% qualified.

Long life span

The optimized radiation heating surface and convective heating surface, the medium flow is more reasonable, without overheat of the carrier and reduce the life;
Convection section: optimize convection heating surface and adopt effective fix and structural support to make its working life longer.
Set up effective flue gas partition for convection heating surface and cast partition to make it works longer.

Easy operation

We have combustion arch patent, which is available for different types of coals, even the anthracite is very easy to burn.
Flame-proof feeding bucket can avoid the feeding bucket is burnt and coking.
There is ash cleaning unit, which is easy for maintaining, operating and cleaning.

Less fuel consumption

Use superior refractory brick to build inside and superior perlite in the middle. Keep the furnace temperature under 50℃ to make the minimization of loss.
Furnace adopts double close line coil, which makes heating surface sufficient.

Model	Rated thermal power (KW)	Rated thermal power (x10⁴kcal/h)	Design working temperature(≤℃)	Rated working pressure(MPa)	Thermal efficiency(≥%)	System installation power(KW)
YLW-1400M/AⅡ	1400	120	320	0.8	80	55
YLW-1800M/AⅡ	1800	160	320	0.8	80	63
YLW-2400M/AⅡ	2400	200	320	0.8	80	76
YLW-2800M/AⅡ	2800	240	300	0.8	80	85
YLW-3500M/AⅡ	3500	300	320	0.8	80	105
YLW-4200M/AⅡ	4200	360	320	0.8	80	125
YLW-4600M/AⅡ	6000	500	320	0.8	80	155
YLW-6000M/AⅡ	7000	600	320	1	80	170
YLW-7000M/AⅡ	8200	700	320	1	80	193
YLW-8200M/AⅡ	4600	400	320	1	80	150
YLW-9400M/AⅡ	9400	800	320	1	80	160
YLW-10500M/AⅡ	10500	900	320	1	80	160
YLW-12000M/AⅡ	12000	1000	320	1	80	260
YLW-14000M/AⅡ	14000	1200	320	1	80	320
YLW-16500M/AⅡ	16500	1400	320	1	80	380
YLW-18000M/AⅡ	18000	1600	320	1	80	450
YLW-21000M/AⅡ	21000	1800	320	1	81	520
YLW-23300M/AⅡ	23300	2000	320	1	81	600
YLW-26000M/AⅡ	26000	2200	320	1	81	700
YLW-29200M/AⅡ	29200	2500	320	1	81	825

YLW Series Biomass-fired Thermal Fluid Heater

Get Price And Support

Related Products